Shave
Vertical cutter method is born from the pursuit of low noise. By changing the cutter, you can get beautiful skin on various materials, like carbide material, north/south sea timber, conifer & resin etc.. Knot can be processed with less chipping, not rough finish on interlocked grain. Suitable for thickness control of laminated wood, core material, MDF etc.. We can also suggest you super finishing planer and slicer, too.
Upper grinding type / 2 motors driven for rough & finish LEG50A
Upper grinding type / 2 motors driven for rough & finish LEG50A
■Feature
1.Adopt “Upper sanding” which can be grinded while checking grinding status.
2.Adopt “Water cooling type” for preventing curve, twist, burnt and clogging of grinding stone.
3.Adopt magnet setting gauge for easy replacement of blade set.
■Use／
| ■Specification | |
|---|---|
| Max.workable size ( LxW H) | 500×90×9mm |
| Angle range of sharpning | 30～45゜ |
| Table right/left feeding speed | 50Hz:10m/min |
| 60Hz:12m/min | |
| Grinding wheel shaft RPM | 50Hz:1500rpm |
| 60Hz:1800rpm | |
| Round grinding wheel for rough grinding
(Dia. x hole dia. x t) |
φ255×φ20×16mm |
| Cup grinding wheel for finish grinding
(Dia. x hole dia. x t) |
φ100×φ15.88×50mm
(tightening part thickness :13mm) |
| Motor for water pump | 20W |
