Shave
Vertical cutter method is born from the pursuit of low noise. By changing the cutter, you can get beautiful skin on various materials, like carbide material, north/south sea timber, conifer & resin etc.. Knot can be processed with less chipping, not rough finish on interlocked grain. Suitable for thickness control of laminated wood, core material, MDF etc.. We can also suggest you super finishing planer and slicer, too.
Vertical milling machine PV50C, PV35CA, PV70CA, PV100CA, PV130CA
Vertical milling machine PV50C, PV35CA, PV70CA, PV100CA, PV130CA
Vertical cutter method is born from the pursuit of low noise.(青文字)
Easy to cut south sea timber, including carbide material & resin.
Knot can be processed with less chipping, not rough finish on interlocked grain.
Suitable for thickness control of laminated wood, core material, MDF etc..
■Use／
| ■Specification |
PV50C
|
PV35CA
|
PV70CA
|
PV100CA
|
PV130CA
|
|---|---|---|---|---|---|
| Max. workable size ( W x t) |
500x200mm |
350×15～200mm
|
700x200mm
|
1050x200mm
|
1350x200mm
|
| Roll pitch |
465mm
|
||||
| Cutting method |
Vertical rotate cutter |
Vertical rotate cutter (internal rotation) |
|||
| Feeding speed |
50Hz：5.5～22.5m/min
60Hz：7～27m/min |
50Hz：6.7～23.3m/min
60Hz：8～28m/min |
50Hz：6～20m/min
60Hz：7～24m/min |
50Hz：4～11m/min
60Hz：4.5～14m/min |
50Hz：4～11m/min
60Hz：4.5～14m/min |
| Main shaft RPM |
50Hz:5300rpm, 60Hz:6360rpm
|
||||
| Working table height |
750mm
|
850mm
|
800mm
|
900mm
|
900mm
|
| Cutter size |
φ180×3 pcs
|
φ180×2 pcs
|
φ180×4 pcs
|
φ180×6 pcs
|
φ180×8枚
|
